The Texas Instruments ISO1640BDR is a high-speed digital isolator designed to provide galvanic isolation between two parts of a system while enabling fast and reliable digital data transmission. It leverages TI’s capacitive isolation technology to achieve robust signal integrity with high common-mode transient immunity, making it suitable for industrial, automotive, and medical applications where isolation and high-speed communication are critical. The ISO1640BDR is a quad-channel device with four independent channels, supporting both unidirectional and bidirectional data flow depending on the configuration. Its small SOIC-16 package allows compact PCB integration without compromising performance.
## Electrical Characteristics
The ISO1640BDR is designed for fast digital signal transmission with low propagation delay and strong isolation characteristics:
* Supply voltage: 3.0 V to 5.5 V for VCC1 and VCC2 sides
* Logic input high voltage (VIH): 2 V minimum at 3.3 V VCC
* Logic input low voltage (VIL): 0.8 V maximum at 3.3 V VCC
* Logic output high voltage (VOH): VCC – 0.4 V minimum at IOH = –2 mA
* Logic output low voltage (VOL): 0.4 V maximum at IOL = 2 mA
* Propagation delay: 30 ns typical, 55 ns maximum, enabling high-speed communication
* Data rate: Up to 25 Mbps in standard configuration
* Supply current: 10 mA typical per side under no load conditions
## Isolation Features
The ISO1640BDR provides robust galvanic isolation and high transient immunity:
* Isolation voltage: 2.5 kV RMS for 1 minute per IEC 60747-5-2 standards
* Transient immunity (CMTI): 100 kV/µs minimum, ensuring reliable operation in noisy industrial environments
* Capacitive isolation: Internal dielectric layer provides stable isolation performance over temperature and lifetime
* Creepage distance: 7.62 mm minimum, sufficient for industrial safety requirements
* Clearance: 7.62 mm typical between isolated pins
## Timing and Performance
The ISO1640BDR is optimized for low-latency, high-speed signal propagation:
* Channel-to-channel skew: 5 ns typical, ensuring synchronized signal transmission across multiple channels
* Output rise time: 9 ns typical at VCC = 5 V and CL = 15 pF
* Output fall time: 9 ns typical at VCC = 5 V and CL = 15 pF
* Minimum pulse width: 20 ns for reliable transmission, supporting high-frequency digital signaling
## Protection and Reliability
The ISO1640BDR integrates protection features to ensure robust operation in industrial applications:
* Electrostatic discharge protection: Human-body model ±4 kV, machine model ±400 V
* Overvoltage tolerance: Isolated channels withstand temporary voltage surges without damage
* Power-on reset: Ensures outputs remain in defined states during startup
* Thermal range: -40 °C to +125 °C ambient operating temperature
* Storage temperature: -65 °C to +150 °C
## Package and Mechanical Features
The ISO1640BDR is designed for compact PCB integration:
* Package type: SOIC-16, surface-mount
* Package dimensions: 10.3 mm × 7.5 mm × 2.0 mm (typical)
* Lead finish: RoHS-compliant tin-lead-free finish suitable for standard soldering processes
* Pin configuration: Four independent channels, with separate VCC1/VCC2 and GND1/GND2 pins
* PCB layout considerations: Proper separation between primary and secondary sides recommended to maintain isolation integrity
## Application Considerations
The ISO1640BDR is ideal for isolated digital communication in a wide range of applications:
* Industrial automation and motor control, isolating control logic from high-voltage systems
* Medical devices, providing patient-safe isolation in data and control circuits
* Isolated data buses for communication protocols such as SPI, I2C, and UART
* Power electronics, separating gate driver logic from high-voltage stages
* Systems requiring high common-mode transient immunity in noisy environments
Designers should ensure proper decoupling of VCC1 and VCC2 to maintain stable operation and minimize noise. Careful layout with adequate creepage and clearance between isolated circuits preserves long-term reliability and safety compliance.
## Key Advantages
* High-speed data transmission up to 25 Mbps with low propagation delay and minimal skew
* Robust 2.5 kV RMS galvanic isolation with 100 kV/µs transient immunity
* Quad-channel configuration supports multiple independent or synchronized data lines
* Wide supply voltage range (3.0 V to 5.5 V) for compatibility with standard logic levels
* Compact SOIC-16 package allows space-efficient PCB integration
* Industrial-grade temperature range and protection features ensure reliable operation under harsh conditions
## Summary
The Texas Instruments ISO1640BDR is a high-performance quad-channel digital isolator providing fast, low-latency communication with strong galvanic isolation. It supports data rates up to 25 Mbps, offers 2.5 kV RMS isolation, and withstands 100 kV/µs common-mode transients, making it ideal for industrial, medical, and automotive applications. Its low propagation delay, minimal channel skew, and compact SOIC-16 package facilitate high-speed, synchronized digital signaling in space-constrained designs. With robust protection against ESD, voltage surges, and thermal extremes, the ISO1640BDR enables reliable isolation and safe operation in demanding environments.