The Texas Instruments CD74HC273E is an 8-bit D-type latch with 3-state outputs, designed for high-speed CMOS applications. This device is particularly useful in digital systems where data storage and transfer are required, such as in registers, memory buffers, and communication interfaces. Below is a detailed introduction to the CD74HC273E, including its specifications and features.
## Overview
The CD74HC273E is an 8-bit latch that allows for the storage of 8 bits of data with high-speed operation and TTL compatibility. It features 3-state outputs, which makes it suitable for interfacing with bussed data systems and other digital circuits where multiple devices share the same data lines.
## Key Specifications
1. Functionality:
- Type: 8-bit D-type Latch
- Number of Channels: 8
- Output Configuration: 3-state outputs
- Data Storage: Stores 8 bits of data, with each bit being independently controlled
2. Input and Output Characteristics:
- Input Voltage Levels:
- Logic High (VIH): Minimum 2.0V (for Vcc = 5V)
- Logic Low (VIL): Maximum 0.8V (for Vcc = 5V)
- Output Voltage Levels:
- Logic High (VOH): Minimum 4.5V (for Vcc = 5V) with Ioh = -4 mA
- Logic Low (VOL): Maximum 0.5V (for Vcc = 5V) with Iol = 4 mA
3. Electrical Characteristics:
- Supply Voltage (Vcc): 2V to 6V
- Quiescent Current (Icc): Typically 1 µA
- Input Current: Typically ±1 µA
4. Switching Characteristics:
- Propagation Delay (tpd): Typical 16 ns (from input to output)
- Setup Time (tsu): Minimum 10 ns (data setup time before the clock edge)
- Hold Time (th): Minimum 2 ns (data hold time after the clock edge)
5. Package Information:
- Package Type: 20-pin SOIC (Small Outline Integrated Circuit)
- Pin Count: 20
- Package Dimensions: 6.2 mm x 5.3 mm (for SOIC-20 package)
6. Thermal Characteristics:
- Operating Temperature Range: -40°C to +85°C
- Storage Temperature Range: -65°C to +150°C
7. Additional Features:
- 3-State Outputs: Allows for easy interfacing with buses or data lines shared among multiple devices.
- Asynchronous Latch Enable (LE): Latches data asynchronously, enabling data to be stored independently of the clock signal.
- Data Inputs (D0-D7): Eight data inputs that are latched on the rising edge of the clock signal when the latch enable is active.
- Output Enable (OE): Control pin for enabling or disabling the 3-state outputs, allowing for high-impedance states when needed.
## Features
- High-Speed Operation: Provides fast data storage and retrieval with low propagation delays, suitable for high-speed digital applications.
- TTL Compatibility: Compatible with TTL logic levels, ensuring seamless integration with other TTL logic devices.
- 3-State Outputs: The 3-state feature allows the outputs to be in a high-impedance state, facilitating bus interfacing and preventing signal contention.
- Wide Supply Voltage Range: Operates over a broad supply voltage range (2V to 6V), providing flexibility for different design requirements.
- Low Power Consumption: CMOS technology ensures low power consumption, which is beneficial in battery-operated and low-power applications.
- Robust Performance: Designed to operate reliably over a wide temperature range, making it suitable for various environmental conditions.
## Applications
The CD74HC273E is used in various digital and electronic applications, including:
- Data Storage: Temporary storage of data in registers and buffers within digital systems.
- Bus Interfaces: Interfacing with data buses where multiple devices share the same data lines.
- Communication Interfaces: Used in communication systems to latch and hold data during transmission.
- Memory Devices: Employed in memory systems to manage and store data temporarily.
## Summary
The Texas Instruments CD74HC273E is a high-speed, 8-bit D-type latch with 3-state outputs, designed for efficient data storage and transfer in digital systems. With its wide supply voltage range, TTL compatibility, and low power consumption, it is suitable for a variety of applications, including data storage, bus interfacing, and communication systems. For detailed design and application information, consulting the CD74HC273E datasheet and technical documents from Texas Instruments is highly recommended.